Last one at EVCigarettes, might as well… got it.
Hashtag World Vape Day today and find out more about it here:
Written by Roberto Sussman1 and Carmen Escrig2
1Institute for Nuclear Sciences, National University of México UNAM. Physics PhD. Director of Pro-Vapeo México AC
2Universidad Autónoma de Madrid, Spain. Biology PhD specialized in Virology. Coordinator of the Medical Platform for Tobacco Harm Reduction in Spain.
PURPOSE The spread of the SARS-CoV-2 pandemic provides fertile ground for spreading misinformation on vaping. Vapers must be equipped with solid information and data to counterargue.
ON SMOKING. The relation between smoking and the progression to severe conditions of COVID-19 is still uncertain, though identified vulnerability conditions for this progression (cardiovascular and respiratory disease, diabetes) in mostly senior patients are strongly correlated with long term harms from smoking.
ON VAPING. There is no evidence that vaping (intrinsically) increases the risk of infection or progression to severe condition of COVID-19. When evaluating risks on vapers it is necessary to consider that most are ex-smokers or still smokers. Vapers with a long previous smoking history could exhibit conditions seen in vulnerable patients. However, this would not be an effect of vaping but of previous smoking. Since completely switching from smoking to vaping improves cardiovascular and respiratory conditions, smokers who switch to vaping are expected to have a better prognosis if infected by SARS-CoV-2
ON PROPYLENE GLYCOL (PG) AS DISINFECTANT. Because of its hygroscopic nature PG vapor (not droplets) can act as environmental disinfectant wiping out pathogens under specific physical conditions. However, there is no evidence on whether this effect will work on SARS-CoV-2 and in the context of vaping.
ON ENVIRONMENTAL VAPOR. While there are no reported and verified cases of contagion, the saliva droplets carrying SARS-CoV-2 virus are much heavier than the rapidly moving volatile droplets of exhaled vapor. Therefore, vapor exhaled by an infected vaper is likely to spread as much viruses as in normal respiration in the personal breathing zone, far less and far closer than spreading by sneezing or coughing.
More info here
Lightweight, easy to use and protected, the Dovpo M VV II (II being the second generation) is a really well made and affordable box mod. This is actually the first Dovpo mod I have purchased. Dovpo makes the Topside which I believe is their best selling mod series. I happened to catch a video on this one a few weeks before release and thought it looked interesting. I really like variable voltage vaping aka VV, being as old as I am, the first variable function mods we used were VV mods only with NO protection. Later the industry added variable wattage aka VW and then temperature control, aka TC to the possibilities.
The mod is very easy to use. You just turn the potentiometer up or down until you feel it has the best heat/flavor combination from your atomizer/eLiquid, thats it. No screen to have to look at. One feature I like is one little inset LED showing you your battery level. Green Amber and Red. Full, half full, and low. As far as protections, it has all the modern ones: Low voltage, overheat, overtime and battery polarity. It also has a USB C connector to charge up your batteries. An output booster also gives you up to 8 volts or 280 watts. That’s a lots of power. Note that I usually don’t vape much beyond 5 volts because I usually build/use lower ohm coils. The other two potentiometer driven mods I own are the HexOhm and the Surric X which uses pulse width modulation or PWM output.
If you were wondering, the M VV II has a very fast response/ramp up time. In other words it responds quickly after you push the button.
As most of the reviewers state, the panel graphics are a bit much. I chose the dragon samurai of the three that are offered. I would have preferred a simple color or pattern to choose from.
Build quality is great and it feels comfortable in your hands.
In conclusion, I think this is a good mod for someone moving up from a pen style or cigalike all in one or AIO style device and also an advanced vaper who wants something simple and low cost with plenty of power and with all the basic safety features built into the chipset.
Tomorrow marks 10 years of not smoking tobacco for me as I started vaping back in 2009. I feel great and have NEVER had any vape related illness. Maybe I am lucky or maybe just smart. I stupidly smoked tobacco for 32 years prior and probably have shortened my life because of it, but even under the current US political situation with flavored eLiquid, I am still standing and vaping proud and will continue to do so until I die. I hope that all vapers stand proud, advocate and not put up with our current political vaping situation. I will NEVER go back to smoking tobacco. Thats my story and I am sticking to it. Stay calm and vape on!
On OFRF’s web page:
…”So will OFRF disappear? Definitely not, OFRF will move into the cannabis and CBD hardware market.
It has always been OFRF’s intention to move into the CBD / THC vaping market. Stated OFRF CEO Chris Hopkins. For the past six months OFRF engineers have been working in collaboration with Wotofo engineers to develop a new coil tech designed specifically for the use in CBD and THC vaping cartridges and we are very excited about this new direction.
Stay tuned for our first CBD pen product launch coming soon.”…
All I have to say is I do love your little eLiquid mesh tank but sorry Chris, wrong direction.
If you don’t like or use mech mods, you can pass up this post.
Mechanical mods are edgy, meaning, they are more extreme in the nature of the vaping world. You kinda need to know what you are doing to make a mech mod behave they way you want it to.
In my experience and reading, people that have only used regulated mods on their vaping journey can’t really understand why you would want to use a battery to power their atomizer alone without being able to turn the power up or down, just on and off. Especially with MTL or mouth to lung style of vaping. That’s where it get’s tricky.
The trick is that you have to build your coils correctly to match the feel you are looking for and not draw too much power or amps from the battery you have chosen to use. If you draw too many amps or power from your battery at one time you take the chance of heating up the battery enough to cause thermal overload, and that my friends, you want to stay far away from. That’s where the term “advanced device” comes into play.
There is something about hitting a high quality, finely machined mech mod with a reasonably low resistance build that is like no other feeling in vaping. You have to try it to understand it. If you don’t want to know or at least understand ohm’s law and understand the nuances of coil building and making mechanical adjustments to hardware, then stay away from mech mods and stay safe with a regulated device that wont let you screw up and get into physical danger. Most advanced regulated devices do feature a “bypass” mode but then again they do or will limit your amp draw for safety so at least you could experiment with that and have a safety net, and that’s all I am going to say.
If you want to learn more about mech mods, check out the Big Lou East Coast Review’s older videos here.
I suggest you use the Steam Engine site to figure out your best battery/coil combo here.
Just in from Marshall Vape Outlet, The SOI or Sub Ohm Innovations 24mm Shorty-X is just amazing. The machining is quite frankly magnificent. A true work of mechanical beauty. Simple but elegant. Perfect fit in your hands. Almost perfect in every way. Oh, did I mention it is weighty?
Sadly, after a number of years in the business, the Sacramento California based SOI company has gone out of business. Here is the quote from Cale on their site.
“To our SOI friends and family:
All of us at sub ohm innovations became interested in vaping because we were smokers. All of us were able to give up cigarettes entirely thanks to vaping. Thanks to flavors. Thanks to small businesses that provide these products. Thanks to passionate people and passionate ex-smokers that helped us, just as they had been helped to quit a dangerous habit.
When sub ohm innovations began, vaping was a light at the end of the tunnel. Since then our federal, state, and local governments have been on a mission to destroy all that has been accomplished in this industry. We have fought tooth and nail to convert every smoker we see to a proven healthier alternative. Our government has fought tooth and nail to stop vaping entirely. In the past couple of years we have seen so many retailers, distributors and manufacturers disappear because of ignorant, misinformed and occasionally malicious regulations. Sub ohm innovations has been an exception. We’ve survived the nonsense and continued providing badass product for the technical/hobby side of vaping. Despite the nonsense, our passion has pushed us farther along than the vast majority of mom-n-pop operations like us, and to the few who are still here: we salute you!
All of that said, it is time for us to close our doors, this is very much a personal choice.
When I first heard about vaping, i thought maybe it would be a good alternative to smoking. I also thought it might be a great way to shake the nicotine addiction. Both of those things are true, but instead of using vaping as a means to end addiction I went full steam ahead. I’ve designed, built, tested, destroyed and rebuilt every vape I could get my hands on. In that process i’ve lost sight of the original purpose, and i’ve nurtured a nicotine addiction that i never really wanted. Being in this industry i’ve secured myself a nearly lifetime supply of vapes and juice… And i’ve got to let it go. Someday I may have the strength to work on vape projects without getting back on nic, but for now i’ve got to separate myself. From everyone at soi: thank you, and stay awesome!
However, if you are lucky, you can pick up the remains they are blowing out at Marshall’s while they last and a few other places in the world ie: Australia, UK etc. that have some stock left, or of course, the used market. Don’t buy a clone.
My experience with SOI is their OG Copper Shorty’s. (I have two of them :-). They have always hit very well/hard and I am especially fond of their innovative button clutch design. I discovered the button clutch assembly of this kind after I first purchased the Broadside Admiral. Similar in design but different in fashion, they are very effective as far as conductivity and low amounts of voltage drop. I’m pretty sure SOI came out with the button clutch first, so I just had to have one or two. End of story.
I am so glad I picked up this beast as it really hits like a mule or even a truck 😉 The clutch button assembly is different than the OG Shorty but works on a similar principal.
I was not sure about the composition of the metal and coatings of these units so I just got the stainless steel one to play it safe and am glad I did. After some research they are indeed all made of stainless steel and they made a copper version. Hard core purists often prefer copper or brass to stainless because of the conductivity and lower voltage drop, but I just not a fan of the stink of the metal and natural oxidation that occurs with them. If I get a copper or brass mech mod, it has to have some sort of cerakoting to cover up the metal smell and lessen the maintenance of cleaning and buffing out the finish. Some like all that stuff and that’s ok. I don’t. I did however make an exception with the “white brass” Admiral.
My other mech mods include the v2 Hades, the Paps X, The SS Dreamer, the VaperzCloud XXX, the Silver Bullet single and double barrel, the Super T Precise ELA and a few 26650 Simplicity’s.
Get one or two if you can, you wont be disappointed.
“As expected, reports of people being hospitalized due to a “mystery lung disease” continue to grow. The non-communicable lung disease that is increasingly being linked to products such as K2/Spice and/or adulterated THC cartridges–sold by underground sellers–is now under investigation in 22 states including CA, CT, FL, IL, IN, IA, MN, MI, NC, NJ, NM, NY, PA, TX, UT, WI, and as of Thursday, Colorado has its first confirmed case.
As of Friday morning, one death in Illinois is being attributed to an unknown substance that people are consuming by way of vaping. CASAA extends our condolences to the family and share in everyone’s disappointment in knowing that this tragic death could have been prevented if more compassionate policies were in place.
In last week’s Heads Up Round Up we briefly highlighted the concern that state and federal drug policy is complicating diagnosis, patient care, and accurate reporting about these clusters of lung disease. But in the wake of these reported illnesses, almost all of the usual anti-tobacco campaigners are using this event to elevate their cries for an all-out ban on nicotine vaping products–especially e-liquids sold in flavors other than tobacco.
Anti-tobacco campaigners are advocating for policies that will do absolutely nothing to prevent events like this in the future. Rather, it is more likely that heavy regulation–even if it isn’t total prohibition–will lead to more instances of people being harmed by fake pot, adulterated THC, or poorly manufactured nicotine products sold on an unregulated, illicit market. According to an article on TechCrunch, the FDA is still uncertain if the products being used even fall under the agency’s regulatory authority.
CASAA is reaffirming our advice to consumers that vapor products (THC and nicotine) should be purchased from reputable sources and not “on the street.” We also note that the terminology used to discuss this issue can benefit from including a clear distinction between nicotine vaping, THC/cannabis vaping, and synthetic cannabinoid vaping (k2/spice). Simply reporting that a mysterious lung disease is generally attributable to “vaping” will have harmful unintended consequences such as sending people back to combustible tobacco or discouraging them from making the switch at all.”
Alex Clark, CEO